IAW Carbon – BMW LCI G2X G8X Gloss Carbon Fiber Interior Trim Kit (Stick-On)

IAW Carbon produces only the highest quality of dry carbon fiber. Some manufactures will use wet carbon or carbon overlays which typically yellow within the first 1-2 years. Our products will not yellow over time and will look pristine on your vehicle for many years to come. IAW Carbon products are direct replacements with OE quality and fitment.

Installation Instructions:

1. Wipe and decontaminate panel with isopropyl alchohol.
2. Test fit the carbon trim piece to ensure all edges are aligned.
3. Heat the panel where the carbon trim piece will be installed. Be sure to not over heat the panel or damage could be caused to the finish.
4. Remove the preinstalled tape backing.
5. Lightly heat the back of the carbon trim piece and tape. Heat is required in order to get the tape to activate and adhere the carbon trim to the panel.
6. Firmly press the carbon trim piece on the panel for at least 30 seconds. Add heat to the panel as needed and press down on any areas that may lifting. Heat is required to ensure the tape is activate.